top of page

Construction

One of our business is production and supply of construction and material handling equipment: fork lifts, tractors, telescopic handlers, trailers, quad bikes,  mini excavators so we can give your company exact specs you need.

Counterbalanced forklift

4-wheel, counterbalanced, high-performance, for heavy loads : 2,000 kg, 2,500 kg, 3,000 kg, 3,500 kg (4,409.2 lb) with combustion engine, operator ride-on for handling and outdoor works.
 

Travel speed 22 km/h

Lifting speed Max.: 0.6 m/s Min.: 0.5 m/s 

Lowering speed 0.6 m/s

Rated output 30 kW, 45 kW (40.8 hp)

Rated speed 2,100 rpm, 2,300 rpm, 2,600 rpm 

Max pressure 200 bar, 225 bar, 230 bar, 245 bar

Oil flow 50 l/min

Noise level 79 dB

Lifting height 3,095- 3,230-3,295-4,095 mm (121.85 in)

Overall width Max.: 1,256 mm  Min.: 1,176 mm

Overall length Max.: 3,796 mm 3,659 mm 

Load center distance: 500 mm, 600 mm 


Weight without load

Max.: 5,302 kg Min.: 3,738 kg 

Axle loading with maximum load front

Max.: 7,667 kg  Min.: 4,916 kg 

Axle loading with maximum load rear

Max.: 1,135 kg  Min.: 822 kg 

Axle loading without load front

Max.: 2,469 kg Min.: 1,795 kg

Axle loading without load rear

Max.: 2,833 kg Min.: 1,912 kg 

Axle loading without load rear

Max.: 2,833 kg Min.: 1,912 kg

 

Track width front Max.: 1,008 mm Min.: 972 mm 

Track width rear 961 mm

Height of mast when lowered

Max.: 2,730 mm Min.: 2,288 mm

Free lift 150 mm

Overall height with mast raised

Max.: 4,861 mm Min.: 3,861 mm 

Height to top of overhead guard

Max.: 2,722 mm Min.: 2,222 mm

Seat height Max.: 1,519 mm Min.: 1,074 mm 

Tow couplig height Max.: 668 mm Min.: 621 mm 

Length to fork face Max.: 2,796 mm Min.: 2,659 mm 

Fork carriage width 1,150 mm

Ground clearance under mast with load

Max.: 124 mm Min.: 120 mm 

Ground clearance at center of wheelbase with load

Max.: 177 mm Min.: 130 mm

Turning circle radius Max.: 2,478 mm Min.: 2,373 mm 

BR1190_P-Matic.png

Towing Tractor

Versatile load transport in all areas of operation. 

 

The autonomous Linde P-MATIC electric tow tractor with operator platform is designed for load transfers in work areas with restricted space. It can move towing loads of between 3000 and 5000 kilograms.

 

Typical uses in warehouses and industrial businesses include the delivery of production materials, disposal of waste products, and hauling of larger loads. The tow tractors, whether as individual vehicles or part of an autonomous fleet, thereby form an integral link in the supply chain – from production to the delivery area. The versatile and robust vehicles have powerful, maintenance-free drive motors with high torque.

Thanks to its intelligent safety system, tow tractor collects data about its working environment optically and reacts adaptively. Using laser detectors and a 3D camera, the system reliably recognizes moving and stationary obstacles. It then adjusts its speed accordingly, or remains stationary, until the person, truck or other obstacle is removed or leaves its monitoring zone. This enables the technology to combine the best possible productivity with the best possible safety. Two emergency buttons, warning sounds and flashing lights round out the safety features.

•Optical environment recognition

•Combined laser and camera technology

•Optimal speed regulation

•Acoustic and visual warning systems

W type design with multioutput, high strength, special steel min. 4 mm. Steel monoblock chassis reinforced with stiffening plate and stiffeners to preventing any cracks in both body and chassis. 

 

  • Manometers  adjusted to 2,5 bar, 2,5” Storz coupling, 2’’ ball valves, 2’’ checkvalves 

  • 3 manhole covers Ø500 mm to DIN norms; turning type hinges Ø480 mm.

  • Discharge with 3 units 4” AKO valves

  • 1 unit 4” (DN 100) Prokosch valve

  • 1 unit Storz coupling

  • 1 unit, 3’’ 4 m long unloading hose and PVC l hose carrier.

  • Fifth wheel height: 1.320 mm

  • 3,5” king pin (SAF)

  • Telescopic, double speed, carry cap. 25 tons (SAF)

  • 4 x 12 ton capacity double tire Turkish Brand Heavy duty Drum brake axles

  • Airlift device for the 1st axle

  • Air suspension system 

  • Tires 315 / 80R / 22,5”  Bridgestone  Pcs : (16)

  • Rims 9 / 22,5” Steel  Pcs : (16)

  • Two-line air brakes with automatic load sensing valve 

  • Parking brake mechanical type

  • EBS WABCO or KNORR

  • Two 7-pins and one 15-pins electrical sockets 24V and 12V installation accordingto EEC standards with lamp protections. ASPOCK

  • Grit blasted 1 coat epoxy primer (undercoat),
    2 coats polyurethane final paint are applied.

Millemium.jpg
concrete-mixer-trailer-stu-trailers-turkey-2.jpg

Concrete Mixer Trailer

Nominal Capacity : 12,360 m3
Volume 12,7 M3
Geometrical Volume : 19,090 m3

Filling Rate : % 64

Drum Speed : 0-14 rpm

Filling Capacity : 15”/m3

Unloading Capacity : 15” - 40”/m3 (By Type of Concrete)

Weight (Empty) : 4.800 kg (± 5%)

Vehicle : 8x4

Rollers : 2 pcs. 280 mm Diameter

Minimum Width : 2.500 mm.

Drum Steel : A-M HB 450 Resistant Steel 4 mm. HB 450 N/mm2 Drum Blade Steel : A-M HB 450 Resistant Steel 4 mm. HB 450 N/mm2 Motion PTO Version : By P.T.O. On Truck Engine

Controls : By cable with control box

Hydrostatic transmission:

• BOSCH-REXROTH A4VTG (90 cm³/rev) Hydraulic Pump

• BOSCH-REXROTH A2FM (80 cm3/rev) Hydraulic Motor

• ZF P-57300 (60.000 Nm) Planet Type Gearbox

• AKG Oil cooler (24 Volt – 18 Liter) Built in Oil Tank, Complete with Cartridge Filter With Indicator and Electric Fan with Thermostat Tropical

Type

 

Water system

• 650 Lt. Steel Pressurized Water Tank With Level Indicator

• Pneumatic Water Control System Standard features :

• 180°Swiveling Discharging Chute with Support and Mechanical Jack for

 

Lifting

• 2 Polystone Extension Chutes with Holders

• Anti-Wear Resistant Plate on Discharging Hopper

• Anti-Wear Resistant Plate on Discharging Chute

• Anti-Wear Resistant Plate on Feeding Hopper

• 160 X 80 X 10 mm S355J0 TS EN 10219-2 Subframe

• Inspection Ladder

• Wash Off Hose on Ladder Pedestal

• Carrying Rollers Made in C40 Special Steel

• Steel Surfaces Shot Blasted in SA 2,5 Grade

• Double Primed in PPG Anti-Rust Painting

• Double Painted PPG Color

Options : Ecologic Cover Oil Cooler / 24 Volt Radiator

 

Cylindrical model
Half Chassis type made of Steel Reguli A1, S355JR

9.000-LT (+,-, %3) with recuperation vapour

5182 Aluminium sheets. Tanker sheets thickness 5,2 mm, 

4 compartments

4 aluminium manholes breather plug 20’’ manhole cover will be present on the tanker.

 

  • BPW brand, disc brake, capacity 9 ton, front axle lifting with driver control.

  • Air spring system and lifting spring, shock absorber.

  • Wabco: ABS or EBS

  • Air suspension, front axle lifting, brake circuit and air required for EBS circuit is provided with 2-airline filter and 2 Air tank. Polyamide brake pipes and special fittings are used in this system.

  • Self-calibrating and automated slack adjusters

  • Double circuit, 25 tons capacity and telescopic mechanic system.

  • JOST type Kingpins SAE Standards ‘2’ diameter KZ 1012 H 50X, produced from forged steel which is resistant to distention and breakage (42 cr Mo 4). Practical assembling and disassembling opportunities are provided.

  • SABA Brand lamps in EEC standards, 24 V lightning system, 7 functions, SABA brand lamps, 7 pin electric socket (24N/24S). 6 side lamps and 1 ABS socket for sides.

  • 6+1 pcs SUPER SINGLE 385*65*R22,5 

  • Half mudguard system, which solves the mud problem and provides aesthetical view. 

  • STD Brand foldable panel bumper.

  • Tanker with two side valve boxes left and right sides, one of side have pump with electronic meter systems 

  • Each compartment equipped with 4’’ diameter pneumatic controlled bottom 

  • Valve and 4‘’ diameter api outlet valves.

  • Product identification cylinder on api valves.

  • Lockable and sealable, damper type luggage compartment door valve equipped with 

  • Flashing interior lights with 1 switch.

  • Push and turn double control type locking mechanism in the valve box.

  • Rain water drain pipes and valve systems will be available to drain rainwater what is 

  • Accumulated on tank body.

  • Overfilling sensor system.

  • Filling / unloading with master switch and top platform safety anti-fall stair system.

  • 6 static electrodes (3‘er pieces on right and left).

bottom of page